Cisco CSR 1000v Series User Manual

Default Settings
Table 34: Default Call Home Settings , on page 268 lists the default Call Home settings.
Table 34: Default Call Home Settings
DefaultParameters
DisabledCall Home feature status
ActiveUser-defined profile status
InactivePredefined CiscoTAC-1 profile status
emailTransport method
XMLMessage format type
EnabledAlert group status
DebugCall Home message severity threshold
20Message rate limit for messages per minute
DisabledAAA authorization
EnabledCall Home syslog message throttling
NormalData privacy level
Alert Group Trigger Events and Commands
Call Home trigger events are grouped into alert groups, with each alert group assigned commands to execute
when an event occurs. The command output is included in the transmitted message. Table 35: Call Home
Alert Groups, Events, and Actions , on page 269 lists the trigger events included in each alert group, including
the severity level of each event and the executed commands for the alert group.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
268
Configuring Call Home for the Cisco CSR 1000v
Default Settings

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English