Cisco CSR 1000v Series User Manual

PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 13
(Optional) Changes the maximum throughput level for the Cisco
CSR 1000v. The available throughput options vary
depending on the release version.
platform hardware throughput level MB{10 | 100
| 1000 | 250 | 2500 | 50 | 500 | 5000}
Example:
Router(config)# platform hardware throughput
level 500
Step 14
Rebooting the Cisco CSR 1000v is not
required.
Note
Exits global configuration mode.end
Example:
Router(config)# end
Step 15
Verifies that the Cisco CSR 1000v maximum throughput level
matches that of the installed license.
show platform hardware throughput level
Example:
Router# show platform hardware throughput
level
Step 16
Example:
The current throughput level is 50000 kb/s
What to Do Next
Repeat these steps for each license available for your PAK.
The following is an example of the show license detail command showing an installed active license:
Router# show license detail
Index: 1 Feature: prem_100M Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 0
Store Name: Primary License Storage
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
198
Installing Cisco CSR 1000v Licenses
Installing CSL Regular Licenses for Cisco IOS XE 3.12S and Earlier

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English