Cisco CSR 1000v Series User Manual

of Cisco CSR 1000v using vSphere, on page 83 . If you wish to do so, you will need to add a second virtual
CD/DVD drive to the VM for vCenter to pass these properties into the VM.
To edit the vApp options to set basic Cisco CSR 1000v properties, do the following:
SUMMARY STEPS
1.
In the vSphere GUI, select the Options tab.
2.
Choose vApp Options > Properties.
3.
Click on the Properties button.
4.
Select the property to be edited and click Edit.
5.
Once you have edited the property, click OK to close.
DETAILED STEPS
Step 1
In the vSphere GUI, select the Options tab.
Step 2
Choose vApp Options > Properties.
Figure 3: vApp Advanced Options for Cisco CSR 1000v
Step 3
Click on the Properties button.
A new window opens that provides access to the properties that can be edited. See the example Advanced Property
Configuration Screen below.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
82
Installing the Cisco CSR 1000v in VMware ESXi Environments
Deploying the Cisco CSR 1000v OVA to the VM using vSphere

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English