Pedestal or Wall Mounting the Node
Description
Two mounting holes on the housing allow pedestal or wall mounting.
Procedure
Follow this procedure for pedestal or wall mounting.
WARNING:
Be aware of the size and weight of the node while mounting. A fully
loaded 1.2 GHz GS7000 Node weighs over 50 lbs (22.7 kg).
Ensure that proper handling/lifting techniques are employed when
working in confined spaces with heavy equipment.
Failure to observe these admonishments can result in serious injury or
death.
1 Remove the cover of the pedestal.
2 Remove the self-tapping bolts from the strand clamps, if previously installed,
To Next Page
Loading...
Need help?
General
