Cisco IOS XE Intelligent Services User Manual

About Cisco IOS XE Software Documentation
Documentation Organization
v
Configuration Guides, Command References, and Supplementary Resources
Table 1 lists, in alphabetical order, Cisco IOS XE software configuration guides and
command references, including brief descriptions of the contents of the documents. The command
references contain commands for both Cisco IOS software and Cisco IOS XE software, for all releases.
The command references support many different software releases and platforms. Your Cisco IOS XE
software release or platform may not support all these technologies.
Table 2 lists documents and resources that supplement the Cisco IOS XE software configuration guides
and command references. These supplementary resources include release notes and caveats; master
command lists; new, modified, removed, and replaced command lists; system messages; and the debug
command reference.
For additional information about configuring and operating specific networking devices, and to access
Cisco IOS documentation, go to the Product/Technologies Support area of Cisco.com at the following
location:
http://www.cisco.com/go/techdocs
Table 1 Cisco IOS XE Configuration Guides and Command References
Configuration Guide and Command Reference Titles Features/Protocols/Technologies
• Cisco ASR 1000 Series Aggregation Services Routers
SIP and SPA Software Configuration Guide
Configuration and troubleshooting of SPA interface processors
(SIPs) and shared port adapters (SPAs) that are supported on the
Cisco ASR 1000 Series Router.
• Cisco ASR 1000 Series Aggregation Services Routers
Software Configuration Guide
Overview of software functionality that is specific to the
Cisco ASR 1000 Series Aggregation Services Routers.
• Cisco IOS XE Access Node Control Protocol
Configuration Guide
• Cisco IOS Access Node Control Protocol
Command Reference
Communication protocol between digital subscriber line access
multiplexers (DSLAMs) and a broadband remote access server
(BRAS).
• Cisco IOS XE Asynchronous Transfer Mode
Configuration Guide
• Cisco IOS Asynchronous Transfer Mode
Command Reference
LAN ATM, multiprotocol over ATM (MPoA), and WAN ATM.
• Cisco IOS XE Broadband Access Aggregation and DSL
Configuration Guide
• Cisco IOS Broadband Access Aggregation and DSL
Command Reference
PPP over Ethernet (PPPoE).
• Cisco IOS XE Carrier Ethernet Configuration Guide
• Cisco IOS Carrier Ethernet Command Reference
IEEE 802.3ad Link Bundling; Link Aggregation Control
Protocol (LACP) support for Ethernet and Gigabit Ethernet links
and EtherChannel bundles; LACP support for stateful
switchover (SSO), in service software upgrade (ISSU), Cisco
nonstop forwarding (NSF), and nonstop routing (NSR) on
Gigabit EtherChannel bundles; and IEEE 802.3ad Link
Aggregation MIB.
• Cisco IOS XE Configuration Fundamentals
Configuration Guide
• Cisco IOS Configuration Fundamentals
Command Reference
Autoinstall, Setup, Cisco IOS command-line interface (CLI),
Cisco IOS file system (IFS), Cisco IOS web browser user
interface (UI), basic file transfer services, and file management.

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English