Cisco IOS XE Intelligent Services User Manual

About Cisco IOS XE Software Documentation
Documentation Organization
vi
• Cisco IOS XE DECnet Configuration Guide
• Cisco IOS DECnet Command Reference
DECnet protocol.
• Cisco IOS XE Dial Technologies Configuration Guide
• Cisco IOS Dial Technologies Command Reference
Asynchronous communications, dial backup, dialer technology,
Multilink PPP (MLP), PPP, and virtual private dialup network
(VPDN).
• Cisco IOS XE High Availability Configuration Guide
• Cisco IOS High Availability Command Reference
A variety of high availability (HA) features and technologies
that are available for different network segments (from
enterprise access to service provider core) to facilitate creation
of end-to-end highly available networks. Cisco IOS HA features
and technologies can be categorized in three key areas:
system-level resiliency, network-level resiliency, and embedded
management for resiliency.
• Cisco IOS XE Intelligent Services Gateway
Configuration Guide
• Cisco IOS Intelligent Services Gateway
Command Reference
Subscriber identification, service and policy determination,
session creation, session policy enforcement, session life-cycle
management, accounting for access and service usage, and
session state monitoring.
• Cisco IOS XE Interface and Hardware Component
Configuration Guide
• Cisco IOS Interface and Hardware Component
Command Reference
LAN interfaces, logical interfaces, serial interfaces, virtual
interfaces, and interface configuration.
• Cisco IOS XE IP Addressing Services
Configuration Guide
• Cisco IOS IP Addressing Services
Command Reference
IP addressing, Address Resolution Protocol (ARP), Network
Address Translation (NAT), Domain Name System (DNS),
Dynamic Host Configuration Protocol (DHCP), and Next Hop
Address Resolution Protocol (NHRP).
• Cisco IOS XE IP Application Services
Configuration Guide
• Cisco IOS IP Application Services
Command Reference
Enhanced Object Tracking (EOT), Gateway Load Balancing
Protocol (GLBP), Hot Standby Router Protocol (HSRP), IP
Services, TCP, Web Cache Communication Protocol (WCCP),
User Datagram Protocol (UDP), and Virtual Router Redundancy
Protocol (VRRP).
• Cisco IOS XE IP Multicast Configuration Guide
• Cisco IOS IP Multicast Command Reference
Protocol Independent Multicast (PIM) sparse mode (PIM-SM),
bidirectional PIM (bidir-PIM), Source Specific Multicast
(SSM), Multicast Source Discovery Protocol (MSDP), Internet
Group Management Protocol (IGMP), and Multicast VPN
(MVPN).
• Cisco IOS XE IP Routing: BFD Configuration Guide Bidirectional forwarding detection (BFD).
• Cisco IOS XE IP Routing: BGP Configuration Guide
• Cisco IOS IP Routing: BGP Command Reference
Border Gateway Protocol (BGP), multiprotocol BGP,
multiprotocol BGP extensions for IP multicast.
• Cisco IOS XE IP Routing: EIGRP
Configuration Guide
• Cisco IOS IP Routing: EIGRP Command Reference
Enhanced Interior Gateway Routing Protocol (EIGRP).
• Cisco IOS XE IP Routing: ISIS Configuration Guide
• Cisco IOS IP Routing: ISIS Command Reference
Intermediate System-to-Intermediate System (IS-IS).
Table 1 Cisco IOS XE Configuration Guides and Command References (continued)
Configuration Guide and Command Reference Titles Features/Protocols/Technologies

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English