Cisco NCS 1002 User Manual

12 49 195.55 1533.073
----------------------------------------------------
13 48 195.50 1533.465
----------------------------------------------------
14 47 195.45 1533.858
----------------------------------------------------
15 46 195.40 1534.250
----------------------------------------------------
16 45 195.35 1534.643
----------------------------------------------------
17 44 195.30 1535.036
----------------------------------------------------
18 43 195.25 1535.429
----------------------------------------------------
19 42 195.20 1535.822
----------------------------------------------------
20 41 195.15 1536.216
----------------------------------------------------
<snip>
VerifyingthePerformanceMonitoringParametersofControllers
Performance monitoring (PM) parameters are used by service providers to gather, store, set thresholds for,
and report performance data for early detection of problems. The user can retrieve both current and historical
PM counters for the various controllers in 15 minutes and 1 day intervals.
show controllers controllertype R/S/I/P {pm {current | history} {15-min | 24-hour} {optics | ether
| fec | otn} linenumber }
For Ethernet controllers, only ingress statistics are supported.
Note
The following sample output displays the current performance monitoring parameters of the Optics controller in 15 minute
intervals.
Example:
RP/0/RP0:ios# show controllers optics 0/1/0/0 pm current 15-min optics 1
Tue Feb 10 14:59:06.945 UTC
Optics in the current interval {14:45:00 - 14:59:05 Tue Feb 15 2015]
Optics current bucket type : Valid
MIN AVG MAX Threshold(Min) TCA(enable) Threshold(Max) TCA(enable)
LBC[mA] : 735 735 735 0 NO 0 NO
OPT[dBm]:-1.23 -1.23 -1.23 2.5 NO 3.5 NO
OPR[dBm]:-1.07 -1.07 -1.07 -23.98 NO -7.5 NO
The following sample output displays the historical performance monitoring parameters of the Ethernet controller in 24
hour intervals.
Example:
RP/0/RP0/CPU0:ios# show controllers HundredGigECtrlr 0/0/0/11 pm current 24-hour ether
Thu Nov 12 04:16:40.598 UTC
ETHER in the current interval [00:00:00 - 04:16:40 Thu Nov 12 2020]
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
29
General Troubleshooting
Verifying the Performance Monitoring Parameters of Controllers

Cisco NCS 1002 Specifications

General

Brand	Cisco
Model	NCS 1002
Category	Network Hardware
Language	English