What to do next
Verify the software version of the NCS 1002. For more information, see Verifying the Software Version, on
page 8
Verifying the Software Version
The NCS 1002 is shipped with a pre-installed Cisco IOS XR software. Verify that the latest version of the
software is installed. If a newer version is available, perform a system upgrade. This will install the newer
version of the software and provide the latest feature set on the NCS 1002.
show version
Displays the software version and details such as system uptime in the Cisco IOS XR EXEC mode.
Example:
RP/0/RP0/CPU0:ios# show version
Tue Nov 10 23:02:37.683 UTC
Cisco IOS XR Software, Version 6.0.0.26I
Copyright (c) 2013-2015 by Cisco Systems, Inc.
Build Information:
Built By : xxxx
Built On : Tue Dec 1 17:02:18 PST 2015
Build Host : build-lnx-100
Workspace : /auto/build-lnx-106-san1/r60x-ws6/nightly_r60x/151201B_ncs1k/workspace
Version : 6.0.0.26I
Location : /opt/cisco/XR/packages/
cisco NCS1K () processor
System uptime is 4 days, 12 hours, 20 minutes
What to do next
Verify the result to ascertain whether a system upgrade is required. If the upgrade is required, see the System
Setup and Software Installation Guide for Cisco NCS 1000 Series.
Troubleshooting the Management Interface
Before you begin
Management interface should be configured.
Step 1 show interfaces mgmtEth instance
Displays the management interface configuration.
Example:
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
8
General Troubleshooting
Verifying the Software Version
To Next Page
Loading...
Need help?
General
