Cisco NCS 560-4 User Manual

Figure 47: Securing the Cables – Side View
Position of the IM Card cables (fan tray side) on the
cable management bracket
2Position of the IM Card cables (dust filter side) on
the cable management bracket
1
Postion of the power supply cables on the cable
management bracket
4Postion of the RSP cables on the cable management
bracket
3
Connecting the Router to the Network
This section describes the various ways to connect the router to the network.
Connecting Console Cables
You cannot use the USB and RS232 console ports at the same time; if you insert the USB cable into the router,
the RS232 port is disabled.
Note
Cisco NCS 560-4 Router Hardware Installation Guide
92
Installing the Cisco NCS 560-4 Router
Connecting the Router to the Network

Cisco NCS 560-4 Specifications

General

Brand	Cisco
Model	NCS 560-4
Category	Network Router
Language	English