Cisco NCS 560-4 User Manual

Installing the Cisco Microsoft Windows XP USB Driver
This procedure shows how to install the Microsoft Windows XP USB driver. Download the driver for your
router model from the Tools and Resources Download Software site, USB Console Software category, at the
following URL:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=268437899
Procedure
Step 1 Unzip the file Cisco_usbconsole_driver_X_X.zip (where X is a revision number).
Step 2 If using 32-bit Windows XP double-click the file setup.exe from the Windows_32 folder, or if using 64-bit
Windows XP double-click the file setup(x64).exe from the Windows_64 folder.
Step 3 The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 4 The Ready to Install the Program window appears. Click Install.
Step 5 The InstallShield Wizard Completed window appears. Click Finish.
Step 6 Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port turns
green, and within a few moments the Found New Hardware Wizard appears. Follow the instructions to
complete the installation of the driver.
The USB console is ready for use.
Installing the Cisco Microsoft Windows 2000 USB Driver
This procedure shows how to install the Microsoft Windows 2000 USB driver.
Procedure
Step 1 Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it.
Step 2 Double-click the file setup.exe.
Step 3 The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 4 The Ready to Install the Program window appears, Click Install.
Step 5 The InstallShield Wizard Completed window appears. Click Finish.
Step 6 Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port turns
green, and within a few moments a series of Found New Hardware Wizard windows appear. Follow the
instructions to complete the installation of the driver.
The USB console is ready for use.
Installing the Cisco Microsoft Windows XP USB Driver
This procedure shows how to install the Microsoft Windows XP USB driver. Download the driver for your
router model from the Tools and Resources Download Software site, USB Console Software category, at the
following URL:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=268437899
Cisco NCS 560-4 Router Hardware Installation Guide
96
Installing the Cisco NCS 560-4 Router
Installing the Cisco Microsoft Windows XP USB Driver

Cisco NCS 560-4 Specifications

General

Brand	Cisco
Model	NCS 560-4
Category	Network Router
Language	English