APPENDIX A
System Specification
This chapter describes the system specifications for Cisco NCS 5700 router.
• Weight and Power Consumption, on page 111
• Environmental Specifications, on page 111
• RJ-45 Connectors, on page 111
• Management Pinouts, on page 112
• Time-of-Day Port Pinouts, on page 112
• USB Flash or MEM Port Pinouts, on page 113
• Console Port Pinouts, on page 113
• Power Supply Power Cord Specifications, on page 114
Weight and Power Consumption
For information on physical specifications and power consumption, refer to the following data sheets:
• NCS-57B1 Fixed Chassis Data Sheet
• NCS-57C3 Fixed Chassis Data Sheet
Environmental Specifications
For information on environmental specifications, see table Environmental properties in the following data
sheets:
• NCS-57B1 Fixed Chassis Data Sheet
• NCS-57C3 Fixed Chassis Data Sheet
RJ-45 Connectors
The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil twisted-pair
or unshielded twisted-pair cable from the external network to the following module interface connectors:
• Router chassis
Hardware Installation Guide for Cisco NCS 5700 Series Fixed-Port Routers
111