Cisco SPA 303 User Manual

Answering Calls
There are a few methods to answer a call, similar to those of placing a call.
• using the handset
• using the speakerphone
• using the headset
To answer a call using the handset:
Pick up the handset.
To answer a call using Hands-Free Speakerphone mode:
Press OR press the answer soft key and speak into the phone.
To answer a call using the headset:
Press or follow the instructions for your optional headset.
Inbound Caller ID
Caller ID Name and Number are presented on the screen of your phone
with each inbound call. If you are using a Simultaneous hunt group the
name of that hunt group will also be passed through to the display of your
phone.
Note
Changes to your Outbound Caller ID Name need to be
made through customer service.
16

Cisco SPA 303 Specifications

General

Keypad number of keys	12
Display resolution	128 x 64 pixels
Call waiting	Yes
Lines quantity	3 lines
Phonebook capacity	60 entries
Do not disturb function	No
Voice codecs	G.711, G.722
Supported network protocols	IPv4 (RFC 791), ARP, DNS (RFC 1706), SRV (RFC 2782), DHCP (RFC 2131), ICMP (RFC 792), TCP (RFC 793), UDP (RFC 768), RTP (RFC 1889, 1890), RTCP (RFC 1889), RTCP-XR (RFC 3611), DiffServ (RFC 2475), ToS (RFC 791, 1349), SNTP (RFC 2030)
Headphone outputs	1
Ethernet LAN (RJ-45) ports	2
Suitable for use in country/location	Europe
Input voltage	100 - 240 V
Dimensions (WxDxH)	220 x 30 x 198 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product type	IP Phone
Product color	Gray
Certification	FCC (15, B), UL, CE, A-Tick
Compliance industry standards	IEEE 802.1p/Q, IEEE 802.3

Weight and Dimensions

Weight	680 g