IMPORTANT SAFETY AND
CONFORMANCE INFORMATION FOR IP
PBX BASE UNIT AND DESKPHONES
Conformance
This equipment is designed for use in the United States.
This equipment complies with the following standards:
FCC Part 15, Subparts B, C, D
FCC Part 68
UL60950
Analog extension ports: TNV3
CO port: TNV3
ADSL port: TNV3
Power fail port TNV3
LAN/WAN ports SELV
Important Safety instructions
The following safety information is reprinted from IEC60950.
•
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and
injury to persons, inc
luding the following:
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on the product.
•
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cl
eaning.
•
Do not use this product near water (for example, in a wet basement).
•
Do not place this product on an unstable cart, stand, or table. The
product can fall, causing serious damage to the produc
t.
•
Slots and openings in the cabinet and the back or bottom are provided
for ventilation, to protect it from overheating; these openings must not
be blocked or covered. This product should never be placed near or
over a radiator or heat regi
ster. This product should not be placed in a
built-in installation unless proper ventilation is pr
ovided.
•
This product should be operated only from the type of power source
indicated in the manual. If you are not sure of the type of power sour
ce
to your building, consult your dealer or local Power Company. The
power socket out
let must be located near the product and must be
easily accessible to allow plu
gging/unplugging.
•
Do not allow anything to rest on the power cord. Do not locate this
product where persons walking on it will abuse the cor
d.
•
Do not use an extension cord with this product’s AC power cord. The
AC outlet for this product should not be used for any other electrical
equipment.
•
Never push objects of any kind into this product through cabinet slots
as they can touch dangerous voltage points or short out parts that
c
ould result in a risk of fire or electric shock. Never spill liquid of any
ki
nd on the product.
•
To reduce the risk of electric shock, do not disassemble this product,
but take it to a qualified serviceman when some service or repair wo
rk
is
required. Opening or removing covers can expose you to
51
To Next Page
Loading...
Need help?
General
Weight and Dimensions
