Call Park Groups.
To Park a Call:
1.
While on a call, press the park soft key.
2.
The phone will respond with a voice prompt such as “Call Parked
o n 9001”. The caller will hear hold music.
3.
To pick up the parked call, anyone on any phone may dial the park
number (9001 in this example) to be connected with the c
aller.
Paging (Intercom)
To page to all phones
Paging allows you to speak to all phones at the same time through their
speaker phone. If you pick up the handset during a page, you will hear
the message in the handset. Paging is used to make announcements
such as “Jim, you have a visitor in the lobby” or to let people know about
a parked call such as “Susan, you have a call waiting on Park 9001”.
Paging will only notify phones not in use or not set to DND.
To group specific phones so only they receive specific Paging calls, login to
the Admin Portal and click the Groups Tab then select Paging Groups.
Initiating a Page
1.
Either pick-up the handset or uses the speaker phone.
2.
Dial the Paging Group (9100 is the Standard Paging Group for all
phones).
3.
Wait for the tone.
4.
Make your announcement which will be heard on all phones.
(Except phones set to DND or phones in us
e)
5.
Hang up the phone when finished.
Redial
The Redial function places a call to the last number dialed. To use the
Redial function, use the redial soft key.
Note
If
a
number
on
an
incoming
call
matches
a
number
in
the
system
speed
dial
list,
the
name
in
the
list
will
be
displayed.
Note
When
a
call
is
parked
on
a
phone,
one
of
the
lines
on
that
phone
is
used
until
the
call
is
picked
up
by
another
phone.
23
To Next Page
Loading...
Need help?
General
Weight and Dimensions
