EasyManuals Logo
Home>Cisco>IP Phone>SPA 303

Cisco SPA 303 User Manual

Cisco SPA 303
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Ending Calls
To end a call:
Do one of the following:
If you are using the handset, Press the Line key to right of the display or
replace the hands
et.
If you are using a headset, press .
If you are using the speakerphone, press .
Forwarding Calls
You can configure your phone so that all incoming calls are forwarded to
another party (refer to Static Forwarding).
All incoming calls can be forwarded to voicemail while Do Not Disturb is
enabled on your phone.
Static Forwarding
Static Forwarding allows you to send ALL incoming call to another phone
number or extension. When Static Forwarding is enabled, your phone will
not ring.
To forward ALL incoming calls to another party:
1.
From the idle display, Press the cfwd soft key on the main display.
2.
Enter the number you would like all calls to forward to.
You may also change the Forwarding setting by going into the menu ,
Go to option 6 Call Forwarding
CFWD All Number to forward All incoming calls
CFWD No Ans Number To forward unanswered incoming call
CFWD Busy Number To forward calls that arrive when you are
already on a ca
ll
3.
Depending on your selection:
a.
If you selected All, enter a number, or extension number, to
17

Table of Contents

Other manuals for Cisco SPA 303

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SPA 303 and is the answer not in the manual?

Cisco SPA 303 Specifications

General IconGeneral
Keypad number of keys12
Display resolution128 x 64 pixels
Call waitingYes
Lines quantity3 lines
Phonebook capacity60 entries
Do not disturb functionNo
Voice codecsG.711, G.722
Supported network protocolsIPv4 (RFC 791), ARP, DNS (RFC 1706), SRV (RFC 2782), DHCP (RFC 2131), ICMP (RFC 792), TCP (RFC 793), UDP (RFC 768), RTP (RFC 1889, 1890), RTCP (RFC 1889), RTCP-XR (RFC 3611), DiffServ (RFC 2475), ToS (RFC 791, 1349), SNTP (RFC 2030)
Headphone outputs1
Ethernet LAN (RJ-45) ports2
Suitable for use in country/locationEurope
Input voltage100 - 240 V
Dimensions (WxDxH)220 x 30 x 198 mm
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product typeIP Phone
Product colorGray
CertificationFCC (15, B), UL, CE, A-Tick
Compliance industry standardsIEEE 802.1p/Q, IEEE 802.3
Weight and Dimensions IconWeight and Dimensions
Weight680 g

Related product manuals