Cisco SPA 303 User Manual

Conne
cting Wired and Wireless Headsets
The C
isco SPA 303 supports headsets from different manufacturers.
Additional information can be found at the manufacturer’s websites:
http://www.plantronics.com
http://www.jabra.com
Each brand and type of headset may require different steps for connection.
Consult the documentation for your particular headset for more information.
In general, to connect a headset, connect the 2.5mm connector from the
headset into the headset port on the right side of the IP phone as shown in the
following graphic:
48

Cisco SPA 303 Specifications

General

Keypad number of keys	12
Display resolution	128 x 64 pixels
Call waiting	Yes
Lines quantity	3 lines
Phonebook capacity	60 entries
Do not disturb function	No
Voice codecs	G.711, G.722
Supported network protocols	IPv4 (RFC 791), ARP, DNS (RFC 1706), SRV (RFC 2782), DHCP (RFC 2131), ICMP (RFC 792), TCP (RFC 793), UDP (RFC 768), RTP (RFC 1889, 1890), RTCP (RFC 1889), RTCP-XR (RFC 3611), DiffServ (RFC 2475), ToS (RFC 791, 1349), SNTP (RFC 2030)
Headphone outputs	1
Ethernet LAN (RJ-45) ports	2
Suitable for use in country/location	Europe
Input voltage	100 - 240 V
Dimensions (WxDxH)	220 x 30 x 198 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product type	IP Phone
Product color	Gray
Certification	FCC (15, B), UL, CE, A-Tick
Compliance industry standards	IEEE 802.1p/Q, IEEE 802.3

Weight and Dimensions

Weight	680 g