Voice Settings
Provisioning
Services Ready Platform SRP 500 Series Administration Guide 114
6
Resync Fails On FNF Determines whether a file-not-found response from the
provisioning server constitutes a successful or a failed
resync. A failed resync activates the error resync timer.
The default is Yes.
Profile Rule This parameter is a profile script that evaluates to the
provisioning resync command. The command is a TCP/
IP operation and an associated URL. The TCP/IP
operation can be TFTP, HTTP, or HTTPS.
If the command is not specified, TFTP is assumed, and
the address of the TFTP server is obtained through
DHCP option 66. In the URL, either the IP address or the
FQDN of the server can be specified. The file name can
have macros, such as $MA, which expands to the device
MAC address.
The default is /spa$PSN.cfg.
Profile Rule B:
Profile Rule C:
Profile Rule D:
Defines second, third, and fourth resync commands and
associated profile URLs. These profile scripts are
executed sequentially after the primary Profile Rule
resync operation has completed. If a resync is triggered
and Profile Rule is blank, Profile Rule B, C, and D are still
evaluated and executed.
The default is (empty).
Log Resync
Request Msg
This parameter contains the message that is sent to the
Syslog server at the start of a resync attempt.
The default is $PN $MAC – Requesting resync
$SCHEME://$SERVIP:$PORT$PATH.
Log Resync
Success Msg
Syslog message issued upon successful completion of
a resync attempt.
The default is $PN $MAC – Successful resync
$SCHEME://$SERVIP:$PORT$PATH -- $ERR.
Log Resync Failure
Msg
Syslog message issued after a failed resync attempt.
The default is $PN $MAC – Resync failed: $ERR.
Field Description
To Next Page
Loading...
Need help?
General
