Cisco XR 12000 Series Hardware Installation Guide

2-67
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters
Cisco XR12000 IPSec VPN SPA Overview
Note that the Cisco XR12000 IPSec VPN SPA (SPA-IPSEC-2G-2) supported on the Cisco XR 12000
Series Router is a different form factor from the IPSec VPN SPA supported on the Cisco 7600 router
(SPA-IPSEC-2G-1).
Warning Attempting to install a SPA-IPSEC-2G-1 into a Cisco XR 12000 SIP-401, Cisco XR 12000 SIP-501, or a
Cisco XR 12000 SIP-601 will result in mounting rail damage. Only the Cisco XR12000 IPSec VPN SPA
(SPA-IPSEC-2G-2) is supported on the Cisco XR 12000 Series Router.
The following sections describe the IPSec VPN SPA:
• IPSec VPN SPA LEDs, page 2-67
IPSec VPN SPA LEDs
The IPSec VPN SPA has one LED, as shown in Figure 2-48.
Figure 2-48 IPSec VPN SPA Faceplate
The IPSec VPN SPA LED is described in Table 2-43.
Caution The Cisco XR 12000 SIP-401, Cisco XR 12000 SIP-501, and Cisco XR 12000 SIP-601 do not support
the IPSec VPN SPA (SPA-IPSEC-2G). Installing a IPSec VPN SPA in these carrier cards could damage
the guide rails.
1 STATUS LED
SPA-IPSEC-2GVPN SERVICES SPA
STATUS
129498
1
Table 2-43 IPSec VPN SPA LED
LED Label Color State Meaning
STATUS Off Off SPA power is off.
Amber On SPA is on and good, and the SPA is being configured.
Green On SPA is ready and operational.

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English