The main display is not
communicating correctly.
Check that the display is plugged in
correctly.
Check the condition of the display
cabling and make sure that no wires
have come out of the plugs.
Replace display if necessary.
There is a main display parity error,
caused by a fault in the display or a
bad connection in the display wiring
loom.
Check the condition of the display
wiring loom, ensuring that no wires
have come out of the plugs.
Replace display if necessary.
There is multi-price display parity
error.
There is a main display parity error.
There is a multi-price display parity
error.