14-37
14. PERIODIC SERVICE
Sc2450 Operator’s Manual
■ Coolant
●Fluids released under pressure from the
cooling system can cause severe burns.
Pressure build-up in the cooling system can,
when the radiator cap is removed, cause the
coolant to gush out explosively.
●Stop the engine and allow it to cool off.
●Do not remove the radiator cap before the
radiator and the engine are sufficiently cool
such that they can be touched with bare hands.
Carefully loosen the cap to the first stop to
allow the pressure to be completely released.
Only then, remove the cap completely.
[The following coolants are recommended]
• High Quality Permanent Type Antifreeze
(Ethylene Glycol with corrosion and rust inhibitor
chemicals)
Before using the coolant, study the instructions and
data on its container to be sure it is suitable for the
engine.
Use a conditioned coolant, or before use, add a
conditioner to the coolant.
Prepare the coolant according to the
recommendation of your local Cub Cadet Yanmar
dealer, and then pour this coolant into the radiator.
This coolant is intended not only to cold the engine
but also to protect the radiator against freezing down
to your local climate.
Follow the instructions on the antifreeze container or
contact your local Cub Cadet Yanmar dealer for
technical assistance. NEVER exceed the maximum
dilution ratio for the coolant. Exceeding the maximum
dilution ratio can jeopardize effectiveness of the
coolant.
9. Every 1000 Hours
! WARNING! WARNING
To Next Page
Loading...
Need help?
General
