7-4
7. OPERATE THE ENGINE
Sc2450 Operator's Manual
2. The seat must be raised mechanically and can be
rotated as shown in the illustration
(counterclockwise only).
3. Turn the seat until it is facing the opposite
direction. Once it is oriented in a straight position,
push down on the seat using both hands.
4. Make sure that the seat is securely locked in
place.
■ Fasten the Retractable Seat Belt
Avoid injury:
●While operating the tractor, make sure to keep
the seat belt fastened with the Roll-Over
Protective Structure (ROPS) equipped. This will
reduce the possibility of injury or death in the
event of an accident such as an overturn or
roll-over.
●NEVER use the retractable seat belt when
operating the tractor without the Roll-Over
Protective Structure (ROPS).
1. Draw out the right and left segments of the
retractable seat belt from the retracted positions
on both sides of the operator's seat.
2. Connect both segments of the belt with the
buckle, being careful to avoid twisting of the belt,
adjust the belt length, being suitable for the
operator.
(A) Buckle
(a) Adjust the belt length
3016415c
3016414e
! WARNING
! WARNING
(A)
(a)
A3013712
To Next Page
Loading...
Need help?
General
