Cub Cadet SC2450 User Manual

15-7
15. SERVICE THE ELECTRICAL SYSTEM
Sc2450 Operator's Manual
■ Replace the Headlight Bulb
IMPORTANT: Avoid damage.
●NEVER touch the headlight bulbs with bare fingers,
otherwise, the bulb may fail prematurely. When
inspecting or replacing the bulb, use gloves or a
piece of cloth to handle the bulb.
1. Park the tractor safely and securely.
2. Stop the engine and remove the key from the
starter key switch.
3. Open the hood.
4. Remove the headlight cover.
5. Turn the headlight bulb socket counterclockwise
slightly to remove it from the headlight bulb
housing.
●The halogen light bulb contains compressed
gas. If the glass has been scratched or is
dropped, the bulb may shatter. Wear protective
goggles and handle the bulb carefully when
replacing it.
6. Remove the old headlight bulb from the bulb
socket.
7. Install new one into the bulb socket and fix it.
8. Turn the headlight bulb socket clockwise slightly
and fix it to the bulb housing.
9. Put on the headlight cover on the headlight bulb
housing and fix it.
10.Close the hood.
11.Check that the headlights light normally.
(A) Headlight assembly
(B) Headlight bulb
(C) Headlight socket
(D) Headlight cover
3. Bulb
P3014935
(A)
! WARNING! WARNING
P3014955
(B)
P3014950
(C)
(D)

Cub Cadet SC2450 Specifications

General

Brand	Cub Cadet
Model	SC2450
Category	Lawn Mower
Language	English