14-33
14. PERIODIC SERVICE
Sc2450 Operator’s Manual
■ Transmission/Hydraulic Oil
IMPORTANT: Avoid damage.
●Make sure to use Cub Cadet Hydraulic/Transmission
Fluid for transmission.
Transmission/Hydraulic Oil
■ Change the Transmission/Hydraulic Oil and Replace the Transmission/Hydraulic Oil
Filter
●When draining away the transmission/
hydraulic oil that is still hot, stay clear of the
hot transmission/hydraulic oil and other
components to avoid burn.
IMPORTANT: Avoid damage.
●NEVER remove the cap from the fill port unless
absolutely necessary. Contaminated transmission/
hydraulic oil can cause the transmission to be
damaged or fail.
●Whenever changing or replacing the transmission/
hydraulic oil and transmission/hydraulic oil filter,
always bleed the transmission/hydraulic oil in order
to avoid malfunction of transmission.
1. Run the engine for several minutes to warm up
the transmission/hydraulic oil.
2. Park the machine safely.
NOTE
●The transmission contains approximately 2.0 US
gal (7.5 L) of oil.
3. Put a drain pan underneath the transmission
drain plug. Remove the drain plug, and allow the
oil to fully drain away.
(A) Transmission drain plug
7. Every 300 Hours
Capacities Lubricants
Approximately
2.0 US gal (7.5 L)
Cub Cadet Hydraulic/Transmission
Fluid
! WARNING! WARNING
3014923
(A)
To Next Page
Loading...
Need help?
General
