EasyManuals Logo
Home>Cub Cadet>Lawn Mower>SC2450

Cub Cadet SC2450 User Manual

Cub Cadet SC2450
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
16-1
16. STORE THE TRACTOR
Sc2450 Operator's Manual
16. STORE THE TRACTOR
Remember that vapor from diesel fuel is explosive and flammable.
The exhaust from the engine contains carbon monoxide that can
lead to carbon monoxide poisoning, possibly causing serious
illness or even death. To avoid the danger of poisoning from the
exhaust gas, NEVER run the engine in a closed building that is not
positively ventilated.
NEVER wash the tractor while the engine is running.
Run the engine as shortly as possible when moving the tractor into
and from the place of storage.
When fuel is in the fuel tank, NEVER store the tractor in a building
where fuel vapor can come into contact with open flame or spark.
Before storing the tractor indoors, allow the engine to cool off.
1. Prepare the Machine for Storage
If planning to store the tractor for a long period, follow the procedure
described below.
The procedure is intended to ensure that the tractor is readily prepared for
operation when it is removed from storage.
1. Repair any worn or damaged parts. Replace the parts as necessary.
Tighten any loose bolts and nuts.
2. Repair scratched or chipped metal surfaces to prevent rusting.
3. Remove grass clippings and debris from the tractor.
4. Clean below the deck and remove grass clippings and debris from
inside the chute and bagger.
5. Remove the ballast from the tractor.
6. Wash the tractor and apply wax to the metal and plastic surfaces.
7. Run the tractor for 5 minutes to dry the belts and pulleys.
8. Apply a light coat of clean engine oil to pivots and wear points to
prevent rusting.
9. Lubricate the lube fittings.
10. Check the tire pressure. Adjust the tire pressure slightly higher than
specified.
11. Change the engine oil and run the engine for about 5 minutes to
circulate the oil throughout the entire engine block and the internal
moving parts.
12. Lower any implement to the ground. Apply grease to
the exposed areas on the hydraulic cylinder piston
rods.
1. Safe Practices for Storage
! WARNING

Table of Contents

Other manuals for Cub Cadet SC2450

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet SC2450 and is the answer not in the manual?

Cub Cadet SC2450 Specifications

General IconGeneral
BrandCub Cadet
ModelSC2450
CategoryLawn Mower
LanguageEnglish

Related product manuals