35D-Link DWR-118 User Manual
Section 4 - Conguration
Select this box to enable routing.
RIPv1: Protocol in which the IP address is routed through the
Internet.
RIPv2: Enhanced version of RIPv1 with added features such as
authentication, routing domain, next hop forwarding, and subnet
mask exchange.
Identies the rule.
Enter the IP of the specied network that you want to access using
the static route.
Enter the subnet mask to be used for the specied net work.
Enter the gateway IP address to the specied network.
Enter the amount of hops it will take to reach the specied
network.
Select this box to enable the rule.
RIP:
ID:
Destination:
Subnet Mask:
Gateway:
Hop:
Enable:
Routing
This page allows you to specify custom routes that determine how data is moved around your network.