D-Link DXS-1210 Series User Manual
26
Time (HH:MM:SS): Enter the current time in hours, minutes, and seconds.
Data (DD/MM/YYYY): Enter the current day, month, and year to update the system clock.
Click the Apply button to save your settings.
System > Time and SNTP > Time Zone Settings
The Time Zone Settings page allows you to configure time zones and Daylight Saving Time settings for
SNTP.
Figure 4.37 – System > Time and SNTP > Time Zone Settings
Summer Time State: Select Summer Time State setting. Options to choose from are Disabled, Recurring
Setting, and Date Setting.
Time Zone: Select the local time zone’s offset from Coordinated Universal Time (UTC).
The Recurring Setting can be configured below:
From: Week of the Month – Select week of the month that daylight saving time will start.
From: Day of the Week - Select day of the week that daylight saving time will start.
From: Month – Select the month that daylight time will start.
From: Time in HH MM – Select the time of the day that daylight saving time will start.
To: Week of the Month – Select week of the month that daylight saving time will end.
To: Day of the Week – Specify day of the week that daylight saving time will end.
To: Month – Select the month that daylight saving time will end.
To: Time In HH MM – Select the time of the day that daylight saving time will end.
Offset – Enter the number of minutes to add during daylight saving time. The default value is 60. The range
of this offset is 30, 60, 90 and 120.
The Date Setting can be configured below:
From: Date of the Month – Select date of the month that daylight saving time will start.
From: Month – Select the month that daylight saving time will start.
To Next Page
Loading...
Need help?
General