31
VCR OPERATION
Hi-Fi Stereo Playback (Hi-Fi Model only)
Playing a tape in Hi-Fi high-quality
¥ ÒHi-FiÓ signal lights up in the top of a screen.
¥ Pressing [AUDIO] button changes menus one by one.
If there are some noises made in recording, please ÒLinearÓ to reduce them.
Forced Mono
Recording Stereo or Secondary Audio Programs (SAP)
¥ In some cases, while receiving a stereo or SAP (Secondary Audio Programs), receiving condition may be poor,
which may cause the stereo or SAP broadcasting to be interfered frequently or its volume to be
uncontrollable. Just pressing [AUDIO] in stereo or SAP forces to fix the condition into mono sound.
¥ To return it, you have two choices, pressing [AUDIO] button again or picking up the channel again.
Hi-Fi
LINEAR
MIX
STEREO
MONO
SAP
¥ Programs are broadcast in mono or stereo audio, or with a SAP.
¥ Pressing [AUDIO] button changes STEREO, MONO, SAP one by one.
¥ While recording in stereo signal, it is recorded in Hi-Fi.
¥ SAP is available only in its service areas from stations.
¥ The following guidelines will help you decide on the best method for recording programs. Choose:
- Stereo reception for normal recording and to record broadcast stereo television.
- Mono reception if the stereo signal is weak and sound is too Ònoisy.Ó
- SAP reception to record a second audio program. An example of a SAP is a program that is broadcast in English, but
has a Spanish SAP.
¥ You can only record stereo and SAPs if the program is a broadcast in stereo or with a SAP. Consult a television guide
for program broadcast information.
A83/84/53/54D1N-QS(˜ ”‚ VE2.0) 03.8.13 11:20 PM ˘`31
To Next Page
Loading...
Need help?
General
