162
Figure 4-38
4.2 Camera
4.2.1 Connection
After register a remote device to the NVR, you can view the video on the NVR, and manage and storage
the video file. Different series products support different remote device amount. Refer to chapter 4.1.4.4
Registration to add a camera.
4.2.1.1 Change IP address
Step 1 From Main menu->Setting->Camera->Registration, check the box before the camera name and
then click Change IP or click the before the camera name.
Enter change IP interface. See Figure 4-39.
Note
Check the box before several cameras, change the IP addresses of several cameras at the
same time.