441
Figure 5-164
Step 2 Set plate number, channel number, start time, end time.
Note
Device supports fuzzy plate number search function.
Device searches all plate numbers by default if you do not input plate number information.
The plate number search and playback function is for one-channel mode only.
Step 3 Click Historic Analytics.
Device displays the corresponding image.
Step 4 Click the image; you can view the record file.
Select a file and then click , you can save current file to peripheral storage device.
Select a file and then click , you can lock current file in case it will be overwritten in the
future
Select a file and then click , you can mark the time of the detected event.
5.13.3 Human Face
System can search the record containing the human face and then playback.
Important
Before you use this function, please make sure current channel has enabled human face detection
function. Please refer to chapter 5.10.3.3 (Setup->Event->Face Detection) for detailed information.
Set the search type as face detect, set channel, start time and end time.
Click Historic analysis button at the right pane or Analysis button at the bottom of the interface, system
begins to search. You can view the event time and image. See Figure 5-165.
Click the image, system begins playback.
Select the file and then click , you can save current file to peripheral device.
To Next Page
Loading...
Need help?
General
