Dahua L Series User Manual

212
Icon
Function
Note
This function is for some series only.
In 1-channel playback mode, click it to enable/disable display IVS rule
information on the video.
4.6.2.2 Clip
This function allows you to clip some footages to a new file and then save to the USB device. See Figure
2-37. Please follow the steps listed below.
Step 1 Select a record first and then click to playback.
Step 2 Select a time at the time bar and then click to start clip,
Step 3 Select a time at the time bar and then click to stop clip,
Step 4 Click , system pops up dialogue box to save the clip file.
Figure 4-96
Note
 Clip function is for one-channel/multiple-channel.
 Max save 1024 files at the same time.
 This function is not for the file already checked in the file list.
4.6.2.3 Record Backup
This function is to backup files you checked in the file list, or the file you just clip.
Click , enter the following interface. See Figure 4-97.

Dahua L Series Specifications

General

Brand	Dahua
Model	L Series
Category	Network Hardware
Language	English