Danfoss VLT AHF 005 Programming Guide

Contents
1 Introduction
4
1.1 Denitions
6
1.1.1 Frequency Converter 6
1.1.2 Input 6
1.1.3 Motor 6
1.1.4 References 7
1.1.5 Miscellaneous 7
2 How to Programme
10
2.1 Local Control Panel
10
2.1.1 How to Operate Graphical LCP (GLCP) 10
2.1.2 How to Operate Numeric LCP (NLCP) 14
2.1.3 Quick Transfer of Parameter Settings between Multiple Frequency Converters 16
2.1.4 Parameter Set-Up 16
2.1.5 Quick Menu Mode 16
2.1.6 Function Set-ups 18
2.1.7 Main Menu Mode 21
2.1.8 Parameter Selection 22
2.1.9 Changing Data 22
2.1.10 Changing a Text Value 22
2.1.11 Changing a Group of Numeric Data Values 22
2.1.12 Value, Step-by-step 23
2.1.13 Read out and Programming of Indexed Parameters 23
2.1.14 Initialisation to Default Settings 23
3 Parameter Descriptions
24
3.1 Parameter Selection
24
3.2 Parameters: 0-** Operation and Display
25
3.3 Parameters: 1-** Load and Motor
37
3.4 Parameters: 2-** Main Menu - Brakes
54
3.5 Parameters: 3-** Main Menu - Reference/Ramps
58
3.6 Parameters: 4-** Main Menu - Limits/Warnings
65
3.7 Parameters: 5-** Main Menu - Digital In/Out
69
3.8 Parameters: 6-** Main Menu - Analog In/Out
82
3.9 Parameters: 8-** Main Menu - Communications and Options
89
3.10 Parameters: 9-** Main Menu - PROFIBUS
96
3.11 Parameters: 10-** Main Menu - CAN Fieldbus
102
3.12 Parameters: 11-** Main Menu - LonWorks
105
3.13 Parameters: 13-** Main Menu - Smart Logic
106
3.14 Parameters: 14-** Main Menu - Special Functions
118
Contents Programming Guide
MG11CE02 Danfoss A/S © 03/2015 All rights reserved. 1

Danfoss VLT AHF 005 Specifications

General

Brand	Danfoss
Model	VLT AHF 005
Category	DC Drives
Language	English