6.4 Parameter Lists - Active Filter
6.4.1 0-** Operation/Display
Par. No. # Parameter description Default value 4-set-up Change
during
operation
Conver-
sion index
Type
0-0* Basic Settings
0-01 Language [0] English 1 set-up TRUE - Uint8
0-04 Operating state at power-up (hand) [1] Forced stop All set-ups TRUE - Uint8
0-1* Set-up Operations
0-10 Active set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Edit set-up [1] Set-up 1 All set-ups TRUE - Uint8
0-12 This set-up linked to [0] Not linked All set-ups FALSE - Uint8
0-13 Readout: Linked set-ups 0 N/A All set-ups FALSE 0 Uint16
0-14 Readout: Edit set-ups/channel 0 N/A All set-ups TRUE 0 Int32
0-2* LCP Display
0-20 Display line 1.1 small 30112 All set-ups TRUE - Uint16
0-21 Display line 1.2 small 30110 All set-ups TRUE - Uint16
0-22 Display line 1.3 small 30120 All set-ups TRUE - Uint16
0-23 Display line 2 large 30100 All set-ups TRUE - Uint16
0-24 Display line 3 large 30121 All set-ups TRUE - Uint16
0-25 My personal menu ExpressionLimit 1 set-up TRUE 0 Uint16
0-4* LCP Keypad
0-40 [Hand on] key on LCP [1] Enabled All set-ups TRUE - Uint8
0-41 [Off] key on LCP [1] Enabled All set-ups TRUE - Uint8
0-42 [Auto on] key on LCP [1] Enabled All set-ups TRUE - Uint8
0-43 [Reset] key on LCP [1] Enabled All set-ups TRUE - Uint8
0-5* Copy/Save
0-50 LCP copy [0] No copy All set-ups FALSE - Uint8
0-51 Set-up copy [0] No copy All set-ups FALSE - Uint8
0-6* Password
0-60 Main menu password 100 N/A 1 set-up TRUE 0 Int16
0-61 Access to main menu w/o password [0] Full access 1 set-up TRUE - Uint8
0-65 Quick menu password 200 N/A 1 set-up TRUE 0 Int16
0-66 Access to quick menu w/o password [0] Full access 1 set-up TRUE - Uint8
Programming Instruction Manual
110 Danfoss A/S © Rev. 2014-02-07 All rights reserved. MG37A222
66
To Next Page
Loading...
Need help?
General