Danfoss VLT FC 100 Service Manual

1.6 Tools Required
Additional Tools Recommended for Testing
•
Digital volt/ohmmeter (PWM-compatible)
•
Analog voltmeter
•
Oscilloscope
•
Clamp-on style ammeter
•
Split-bus power supply p/n 130B3146
•
Signal test board p/n 176F8437
•
Signal test board extension p/n 130B3147
•
Metric socket set (0.28 - 0.75 in [7–19 mm])
•
Socket extensions (3.94–5.91 in [100–150 mm])
•
Torx driver set (T10–T50)
•
Torque wrench (4.4–168.2 in-lbs [0.5–19 Nm])
•
Needle nose pliers
•
Magnetic sockets
•
Ratchet
•
Screwdrivers
•
ESD protective mat and wrist strap
Introduction Service Manual
MG94A222 Danfoss A/S © Rev. 2014-02-10 All rights reserved. 9
1
1

Danfoss VLT FC 100 Specifications

General

Brand	Danfoss
Model	VLT FC 100
Category	DC Drives
Language	English