Danfoss VLT Flow Drive FC 111 Design Guide

•
•
•
•
•
•
1 Introduction
1.1 Purpose of this Design Guide
This Design Guide is intended for qualified personnel, such as:
Project and systems engineers.
Design consultants.
Application and product specialists.
The Design Guide provides technical information to understand the capabilities of the VLT® Flow Drive FC 111 for integration into
motor control and monitoring systems. Its purpose is to provide design considerations and planning data for integration of the
drive into a system. It caters for selection of drives and options for a diversity of applications and installations. Reviewing the de-
tailed product information in the design stage enables developing a well-conceived system with optimal functionality and efficien-
cy.
This manual is targeted at a worldwide audience. Therefore, wherever occurring, both SI and imperial units are shown.
VLT
®
is a registered trademark for Danfoss A/S.
1.2 Additional Resources
1.2.1 Other Resources
Other resources are available to understand advanced drive functions and programming.
VLT® Flow Drive FC 111 Operating Guide provides basic information on mechanical dimensions, installation, and programming.
VLT® Flow Drive FC 111 Programming Guide provides information on how to program, and includes complete parameter de-
scriptions.
Danfoss VLT® Energy Box software. Select PC Software Download at
www.danfoss.com.
VLT® Energy Box software allows energy consumption comparisons of HVAC fans and pumps driven by Danfoss drives and alterna-
tive methods of flow control. Use this tool to accurately project the costs, savings, and payback of using Danfoss drives on HVAC
fans, pumps, and cooling towers.
Supplementary publications and manuals are available from Danfoss website www.danfoss.com.
1.2.2 MCT 10 Set-up Software Support
Download the software from the service and support section on www.danfoss.com.
During the installation process of the software, enter access code 81462700 to activate the VLT® Flow Drive FC 111 functionality. A
license key is not required for using the VLT® Flow Drive FC 111 functionality.
The latest software does not always contain the latest updates for drives. Contact the local sales office for the latest drive updates (in
the form of *.OSS files).
1.3 Document and Software Version
This guide is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this manual is English.
Table 1: Document and Software Version
Edition
Remarks
Software version
AJ363928382091, version 0101
First edition.
65.00
1.4 Regulatory Compliance
1.4.1 Introduction
AC drives are designed in compliance with the directives described in this section.
1.4.2 CE Mark
The CE mark (Communauté Européenne) indicates that the product manufacturer conforms to all applicable EU directives. The EU
directives applicable to the design and manufacture of drives are listed in the following table.
AJ363928382091en-000101 / 130R098310 | Danfoss A/S © 2021.04
Introduction
VLT® Flow Drive FC 111
Design Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English