Danfoss VLT Flow Drive FC 111 Design Guide

315 (450)
–
aR-800
Table 39: H13–H14 Power/semiconductor Fuse Options, 380–480 V
Model
Fuse Options
Bussman
Littelfuse
Littelfuse
Bussman
Siba
Ferraz-Shawmut
Ferraz-Shawmut(Europe)
P110
170M2619
LA50QS300-4
L50S-300
FWH-300A
20 189 20.315
A50QS300-4
6,9URD31D08A0315
P132
170M2620
LA50QS350-4
L50S-350
FWH-350A
20 189 20.350
A50QS350-4
6,9URD31D08A0350
P160
170M2621
LA50QS400-4
L50S-400
FWH-400A
20 189 20.400
A50QS400-4
6,9URD31D08A0400
P200
170M4015
LA50QS500-4
L50S-500
FWH-500A
20 189 20.550
A50QS500-4
6,9URD31D08A0550
P250
170M4016
LA50QS600-4
L50S-600
FWH-600A
20 189 20.630
A50QS600-4
6,9URD31D08A0630
P315
170M4017
LA50QS800-4
L50S-800
FWH-800A
20 189 20.800
A50QS800-4
6,9URD32D08A0800
6.10 Control Terminals
Remove the terminal cover (H1-H8) or the cradle cover (H13-H14) to access the control terminals.
H1-H8
Use a flat-edged screwdriver to push down the lock lever of the terminal cover under the LCP, then remove the terminal cover as
shown in Illustration 55.
e30bd331.11
Illustration 55: Removing the Terminal Cover
H13-H14
Press the tips of the cradle cover inwards as shown in Illustration 56, and then lift the cradle cover up.
AJ363928382091en-000101 / 130R0983 | 75Danfoss A/S © 2021.04
Electrical Installation
Considerations
VLT® Flow Drive FC 111
Design Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English