Danfoss VLT Flow Drive FC 111 Design Guide

•
•
•
•
•
•
•
•
•
•
•
C. Navigation keys and indicator lights
Table 44: Legend to Section C, Illustration 3
6
Com. (yellow indicator): Flashes during bus communication.
7
On (green indicator): Shows the power on status.
8
Warn. (yellow indicator): Indicates a warning.
9
Alarm (red indicator): Indicates an alarm.
10
[Back]: For moving to the previous step or layer in the navigation structure.
11
Up arrow key, down arrow key, and right arrow key: For navigating among parameter groups and parameters, and within
parameters. They can also be used for setting local reference.
12
[OK]: For selecting a parameter and for accepting changes to parameter settings.
D. Operation keys and indicator lights
Table 45: Legend to Section D, Illustration 3
13
[Hand On]: Starts the motor and enables control of the drive via the LCP.
N O T I C E
[2] Coast inverse is the default option for parameter 5-12 Terminal 27 Digital Input. If there is no 24 V supply to terminal 27,
[Hand On] does not start the motor. Connect terminal 12 to terminal 27.
14
[Off/Reset]: Stops the compressor (Off). If in alarm mode, the alarm is reset.
15
[Auto On]: The drive is controlled either via control terminals or serial communication.
7.2 Menus
7.2.1 Status Menu
In the Status menu, the selection options are:
Motor frequency [Hz], parameter 16-13 Frequency.
Motor current [A], parameter 16-14 Motor current.
Motor speed reference in percentage [%], parameter 16-02 Reference [%].
Feedback, parameter 16-52 Feedback [Unit].
Motor power parameter 16-10 Power [kW] for kW, parameter 16-11 Power [hp] for hp. If parameter 0-03 Regional Settings is set to
[1] North America, motor power is shown in hp instead of kW.
Custom readout, parameter 16-09 Custom Readout.
Motor Speed [RPM], parameter 16-17 Speed [RPM].
7.2.2 Quick Menu
7.2.2.1 Quick Menu Introduction
Use the Quick Menu to program the most common functions. The Quick Menu consists of:
Wizard for open-loop applications.
Wizard for closed-loop applications.
Motor set-up.
Changes made.
AJ363928382091en-000101 / 130R098382 | Danfoss A/S © 2021.04
Programming
VLT® Flow Drive FC 111
Design Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English