Danfoss VLT Midi Drive FC 280 Programming Guide

13-52 SL Controller Action
Option: Function:
[0] * Disabled Select the action corresponding to the SLC
event. Actions are executed when the
corresponding event (dened in
parameter 13-51 SL Controller Event) is
evaluated as true.
[1] No action
[2] Select set-up
1
Changes the active set-up
(parameter 0-10 Active Set-up) to 1. If the set-
up is changed, it merges with other set-up
commands coming from either the digital
inputs, or via a eldbus.
[3] Select set-up
2
Changes the active set-up
(parameter 0-10 Active Set-up) to 2. If the set-
up is changed, it merges with other set-up
commands coming from either the digital
inputs, or via a eldbus.
[4] Select set-up
3
[5] Select set-up
4
[10] Select preset
ref 0
Select preset reference 0. If the active preset
reference is changed, it merges with other
preset reference commands coming from
either the digital inputs or via a eldbus.
[11] Select preset
ref 1
Selects preset reference 1. If the active
preset reference is changed, it merges with
other preset reference commands coming
from either the digital inputs, or via a
eldbus.
[12] Select preset
ref 2
Selects preset reference 2. If the active
preset reference is changed, it merges with
other preset reference commands coming
from either the digital inputs, or via a
eldbus.
[13] Select preset
ref 3
Selects preset reference 3. If the active
preset reference is changed, it merges with
other preset reference commands coming
from either the digital inputs, or via a
eldbus.
[14] Select preset
ref 4
Selects preset reference 4. If the active
preset reference is changed, it merges with
other preset reference commands coming
from either the digital inputs, or via a
eldbus.
[15] Select preset
ref 5
Selects preset reference 5. If the active
preset reference is changed, it merges with
other preset reference commands coming
from either the digital inputs, or via a
eldbus.
[16] Select preset
ref 6
Selects preset reference 6. If the active
preset reference is changed, it merges with
13-52 SL Controller Action
Option: Function:
other preset reference commands coming
from either the digital inputs, or via a
eldbus.
[17] Select preset
ref 7
Selects preset reference 7. If the active
preset reference is changed, it merges with
other preset reference commands coming
from either the digital inputs, or via a
eldbus.
[18] Select ramp 1 Selects ramp 1.
[19] Select ramp 2 Selects ramp 2.
[22] Run Issues a start command to the frequency
converter.
[23] Run reverse Issues a start reverse command to the
frequency converter.
[24] Stop Issues a stop command to the frequency
converter.
[25] Qstop Issues a quick stop command to the
frequency converter.
[26] DC Brake Issues a DC-brake command to the
frequency converter.
[27] Coast The frequency converter coasts immediately.
All stop commands including the coast
command stop the SLC.
[28] Freeze output Freezes the output of the frequency
converter.
[29] Start timer 0 See parameter 13-20 SL Controller Timer for
further description.
[30] Start timer 1 See parameter 13-20 SL Controller Timer for
further description.
[31] Start timer 2 See parameter 13-20 SL Controller Timer for
further description.
[32] Set digital
out A low
Any output with SL output A is low.
[33] Set digital
out B low
Any output with SL output B is low.
[34] Set digital
out C low
Any output with SL output C is low.
[35] Set digital
out D low
Any output with SL output D is low.
[38] Set digital
out A high
Any output with SL output A is high.
[39] Set digital
out B high
Any output with SL output B is high.
[40] Set digital
out C high
Any output with SL output C is high.
[41] Set digital
out D high
Any output with SL output D is high.
[60] Reset
Counter A
Resets counter A to 0.
Parameter Descriptions Programming Guide
MG07C102 Danfoss A/S © 12/2015 All rights reserved. 89
4 4

Danfoss VLT Midi Drive FC 280 Specifications

General

Brand	Danfoss
Model	VLT Midi Drive FC 280
Category	DC Drives
Language	English