DataCard CR500 User Manual

Datacard CR500 User Reference Guide Clean the System
25
24
Clean the Multi-Hopper
The mul-hopper holds cards before they are printed. Clean the hoppers aer every
200 cards or when you noce debris on cards.
1. Unlock and open the security enclosure door.
2. Remove all cards from the mul-hopper. Track the hopper(s) in which cards
were placed so you can replace them aer cleaning.
3. Prepare a cleaning card by folding a magnec stripe cleaning card. Do not
apply any type of uid to the card.
4. Clean the tracks:
a. Insert the folded card into hopper 1 and push it all the way along the
back track, toward the print unit. Remove the card. Repeat for hoppers 2
and 3.
b. Use the clean end of the card to clean the front track following the
instrucons in step 4a.
5. Discard the used cleaning card.
6. If cleaning is complete, close the security enclosure door to lock the printer.
or
Connue with “Clean the Print Unit.”
1
2
3
4a
4b

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English