DS2 Instruction Manual
10. TECHNICAL DATA
Consumption of emitter unit:
1 switching output; load max 10 k
load min 100
1 analogue output ; 0-10 V (V
max.
2%)
Output current on switching output:
100 mA; short-circuit protection
Output voltage on switching output:
-1.5 Vmax of the power supply
at T=25°C
See table “Response time” below
Relative measurement precision:
Absolute measurement precision:
Dimensional difference between objects
equally detected in asbolute Teach-in:
Dimensional difference between objects
equally detected in relative Teach-in
0. 5 mm width, 10 … 55 Hz frequency,
(EN 60068-2-6)
11 ms (30 G) 6 shock for each axis (EN 60068-2-27)
Painted aluminium (Pulverit 5121/0085 Black)
M12 4-poles connector for TX
M12 8-poles connector for RX
Min. 1.9 kg – Max. 4.6 kg
10.1. Response time
Top beam
57600 baud
binary
Top beam
9600 baud
binary
Top beam
57600 baud
ASCII
Complete
Beams
Status
57600 baud
binary
Complete
Beams
Status
9600 baud
Binary
Complete
Beams
Status
57600 baud
ASCII
Complete
Beams
Status
9600 baud
ASCII