DeDietrich Diematic iSystem User Manual

6.3 Customising maintenance
6.3.1. Maintenance message
The boiler incorporates a function that can be used to display a
maintenance message. To set the parameters for this function,
proceed as follows:
1. Access the "After Sales" level: Hold down the
-
key until
#PARAMETERS is displayed.
2. Select the menu #REVISION.
4 Turn the rotary button to scroll through the menus or
modify a value.
4 Press the rotary button to access the selected menu
or confirm a value modification.
¼
For a detailed explanation of menu browsing, refer to
the chapter: "Browsing in the menus", page 31
3. Set the following parameters:
After Sales level - #REVISION Menu
Parameter Adjustment range Description
TYPE NO
Factory setting
No message indicating that maintenance is necessary
MANU
Recommended setting
Signals that maintenance is necessary on the date selected. Set the date using the
parameters below.
AUTO
a Not applicable. Do not select this setting.
REVISION HOUR
(1)
0 to 23 Time at which the REVISION display appears
REV.YEAR
(1)
2008 to 2099 Year in which the REVISION display appears
REVIS.MONTH
(1)
1 to 12 Month in which the REVISION display appears
REVISION DATE
(1)
1 to 31 Day on which the REVISION display appears
(1) The parameter is only displayed if MANU is configured.
Clearing the maintenance message:
After carrying out the maintenance operations, modify the date in the
#REVISION menu to clear the message.
In the event of maintenance before the maintenance message is
displayed:
After carrying out early maintenance operations, it is necessary to set
a new date in the #REVISION menu.
bar
1
1
2
2
r
c
STD
(
'
t
v
0 2 4 6 8 10 12 14 16 18 22 2420
p
b
AUTO
x
c
r
j
M
g
m
SUNDAY 11:45
10
"
TEMP.: _ _ _ _
C002272-C-04
6. Maintenance
Diematic iSystem For C 330 / C 630 ECO
65
31082018 - 7600691-001-06

DeDietrich Diematic iSystem Specifications

General

Brand	DeDietrich
Model	Diematic iSystem
Category	Control Panel
Language	English