Operation
DeLaval milking point controller MPCII
94381001.pdf2006-07-20
the time can be set.
F840 – Opens all gates
Not in tandem
Opens all gates in the parlour. There is no
close all function.
F901 – Milk meter offset
Shows milk meter offset and AD converter
value in decimal, ooo.aaa, where ooo=offset
value and aaa=AD converter value. This is
used in standby mode and milking mode.
New feature on the MPCII
6 x
4 x
New features in the front and display
One new feature is that the display in some
functions will show letters with text strings
that are improved abbreviations. The
display consists of six main areas. Each of
these areas is 14 small LEDs. The LED's
have a smaller area compared with the old
MPC and also a sharper light.
New features in the hardware
• The size of the MPCII is the same as the
old MPC.
• The MPCII has only one PCB.
• There is no battery connected on the
PCB: If the power supply is disconnected
the MPC will store the parameters and
mode
• The MPCII buttons have an improved
plastic steering i.e. to avoid that the
buttons on the PCB get stuck.
• The connection outputs on the back of the
MPC are basically the same. One new
output, the RS232 output, is for DeLaval
development staff only.
• All the "com"-outputs have changed name
to DC out.
87(94)
To Next Page
Loading...
Need help?
General