3-46 Service Manual
7. Close the rear door.
8. Reinsert the photoconductor kit and toner cartridge.
9. Close the front door.
10. Touch Continue.
202 paper jam
Touch Status/Supplies to identify the location of the jam. If the paper is exiting the MFP into the exit bin, pull the
paper out and touch Continue.
If the paper is still in the paper path:
1. Open the rear door.
2. Remove the jammed paper.
3. Close the rear door.
4. Touch Continue.
231 paper jam
CAUTION: Hot surface. The inside of the printer may be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
1. Open the front door.
2. Open the rear door.
To Next Page
Loading...
Need help?
General
