Dell Inspiron 9400 User Manual


2. Align the display assembly over the screw holes in the base of the computer.

3. Replace the four M2.5 x 5-mm screws.

4. Connect the display cable to the system board.

5. Reroute the display cable into the cable channel.

6. Replace the hinge cover (see Replacing the Hinge Cover).

7. If a Mini-Card is installed, connect the antenna cables to the card (see Mini-Card). If one is not installed, tuck the antenna cables into their secured
location.

8. Replace the Mini-Card cover.
Display Bezel
NOTE: The left hinge assembly has a small tab that you must first insert underneath the edge of the palm rest.
1
tab
NOTE: When you replace the four screws, ensure that you tighten them in the order indicated by the labels "1," "2," "3," and "4" on the display hinges.

Dell Inspiron 9400 Specifications

General

Hard Drive Interface	SATA
Battery	6-cell or 9-cell Lithium Ion
Processor	Intel Core Duo T2400 / T2500
RAM	Up to 2GB DDR2 SDRAM
Display	17-inch WXGA+ (1440x900) or WUXGA (1920x1200)
Graphics	NVIDIA GeForce Go 7800
Optical Drive	DVD+/-RW
Operating System	Windows XP Media Center Edition or Windows XP Professional
Chipset	Intel 945PM Express
Wireless	Intel PRO/Wireless 3945ABG
Dimensions	15.5 x 11.3 x 1.6 inches
Storage	60GB / 80GB / 100GB / 120GB 5400RPM or 100GB 7200RPM