Dell OptiPlex 360 User Manual

Power Supply 111
6 Press down on the release button on the floor of the computer chassis, and
slide the power supply toward the front of the computer by approximately
one inch.
7 Lift the power supply up and out of the computer.
Replacing the Power Supply in the Desktop Computer
NOTE: This procedure assumes that you have completed the removal procedure
first.
1 Slide the power supply into place at the back of the computer chassis.
2 Replace and tighten the two screws that secure the power supply to the
back of the computer chassis.
1 release button 2 power supply
3 screws (2) 4 AC power connector
1 2 3
4

Dell OptiPlex 360 Specifications

General

Brand	Dell
Model	OptiPlex 360
Category	Desktop
Language	English