EasyManuals Logo

Dell OPTIPLEX 740 User Manual

Dell OPTIPLEX 740
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background image
Small Form Factor Computer
Replacing the Chassis Intrusion Switch
1. Gently slide the chassis intrusion switch into its slot and reconnect the cable to the system board.
2. Replace the computer cover (see Replacing the Computer Cover).
Resetting the Chassis Intrusion Detector
1. Turn on (or restart) your computer.
2. WhentheblueDELL™logoappears,press<F2>immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft®Windows®desktop. Then shut down your
computer and try again.
3. Select the Chassis Intrusion option and then press the left- or right-arrow key to select Reset. Change the setting to On, On-Silent, or Disabled.
4. Press <Esc>, press the left- and right-arrow keys to highlight Save/Exit, and then press <Enter> to restart the computer and implement your changes.
NOTE: The default setting is On-Silent.

Table of Contents

Other manuals for Dell OPTIPLEX 740

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell OPTIPLEX 740 and is the answer not in the manual?

Dell OPTIPLEX 740 Specifications

General IconGeneral
AudioIntegrated High Definition Audio
ProcessorAMD Athlon 64 X2, AMD Sempron
MemoryUp to 8GB DDR2
StorageSATA HDD
GraphicsOptional discrete graphics
Form FactorMini Tower
Expansion Slots1 PCI-e x16
Optical DriveDVD-ROM, DVD+/-RW
NetworkIntegrated 10/100/1000 Ethernet
Power SupplyMini-Tower: 305W
PortsUSB 2.0, serial, parallel, VGA, audio
Operating SystemWindows XP

Related product manuals