Dell OPTIPLEX 740 User Manual


7. Connect any cables that should be attached to the card.

8. Before you close the card retention mechanism, ensure that:
l The tops of all cards and filler brackets are flush with the alignment bar.
l The notch in the top of the card or filler bracket fits around the alignment guide.

9. Secure the card(s) by closing the card retention latch and snapping it into place.

10. Replace the computer cover (see Replacing the Computer Cover).
1
PCI Express x16 or DVI card
2
PCI Express x16 card connector
1
PCI Express x16 card
2
DVI card connector
3
PCI Express x16 card connector
1
fully seated card
2
not fully seated card
3
bracket within slot
4
bracket caught outside of slot




NOTICE: Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage
to the equipment.
NOTE: See the documentation for the card for information about the card's cable connections.

Dell OPTIPLEX 740 Specifications

General

Audio	Integrated High Definition Audio
Processor	AMD Athlon 64 X2, AMD Sempron
Memory	Up to 8GB DDR2
Storage	SATA HDD
Graphics	Optional discrete graphics
Form Factor	Mini Tower
Expansion Slots	1 PCI-e x16
Optical Drive	DVD-ROM, DVD+/-RW
Network	Integrated 10/100/1000 Ethernet
Power Supply	Mini-Tower: 305W
Ports	USB 2.0, serial, parallel, VGA, audio
Operating System	Windows XP