Removing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Close the display and turn the computer over.
2 Using a screw driver, remove the screw cover located at the center of the
base cover.
1 base cover 2 screw cover
3 screw driver
15
To Next Page
Loading...
Need help?
General
