NOTE: Ensure that you fold the keyboard data cable in perfect alignment.
3. Install the:
a. battery
b. base cover
c. SD card
4. Follow the procedure in After working inside your computer.
Memory modules
Removing the primary memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
3. To remove primary memory module:
a. Pry the retention clips away from the memory module until it pops up.
b. Lift the memory module and remove it from the system.
Installing the primary memory module
1. To Install the primary memory module:
a. Insert the memory module into the memory socket.
b. Press the clips to secure the memory module to the system board.
Removing and installing components
33
To Next Page
Loading...
Need help?
General
