Identifier GUID-2850CA15-9CEF-415A-ADAA-1614E65C491B
Status Released
Removing the display back-cover and antenna
assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-903B27F5-F40B-4747-937C-E3A1B5D98331
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the display assembly.
4 Remove the display bezel.
5 Remove the camera.
6 Remove the display panel.
7 Remove the display hinges.
8 Remove the display cable.
Identifier GUID-0714D736-2D30-45B6-B2DE-D6DE25F7B29C
Status Released
Procedure
After performing all the above steps, we are left with the display back-cover and antenna assembly.
52
Removing the display back-cover and antenna assembly 105
To Next Page
Need help?
General
