Identifier GUID-40DC76F7-B3EC-450A-848E-632D68C352E2
Status Released
Replacing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-BE6FBB2D-A610-47AA-9497-5CEFE7C38771
Status Released
Procedure
NOTE: If the rubber grommets are pushed out when removing the speakers, push them back in before replacing the speakers.
1 Using the alignment posts and rubber grommets, place the left speakers in the slots on the palm rest and keyboard assembly.
2 Route the speaker cable through the routing guides on the palm rest and keyboard assembly and replace the right speaker.
3 Connect the speaker cable to the system board.
Identifier GUID-8C94348D-F914-4B7D-AC69-69CBCCD169AD
Status Released
Post-requisites
1 Replace the solid-state drive/Intel Optane.
2 Replace the base cover.
25
52 Replacing the speakers